Door handle hourly salt spray test Stainless steel pickling passivation solution is easy to operate. It only takes a few minutes of soaking to remove stubborn oxide scale, weld spots, yellow rust, and red rust.
Stainless steel pickling passivation liquid for rust removal
Stainless steel pickling passivation liquid for stainless steel rust removal Stainless steel rust remover
Product Introduction
Stainless steel pickling passivation liquid
Clear Chemical preparations for yellow, blue, black weld spots and oxide scale produced after stainless steel welding and high-temperature processing. It is suitable for ferrite, austenitic and other stainless steels. It can fully pickle and passivate stainless steel to form a complete passivation film. Effectively improve its corrosion resistance
How to use
This product can be pickled and passivated at one time.
If the stainless steel pipe fittings are oily, they must be degreased and degreased first or our company's stainless steel degreasing cleaning agent can be used.
After soaking, pour the pickling passivation solution into the pickling tank, and then put the stainless steel workpiece into the pickling passivation solution. The soaking time at room temperature is about >> minutes (if the oxide scale on the stainless steel surface is thicker The pickling passivation time can be appropriately extended >)>. After completion, take out the stainless steel workpiece, clean it with clean water or high-pressure water and dry it.
Circular use: Inject the pickling passivation liquid into the stainless steel pipe and use a chemical pump to circulate it. The cycle time is about >> minutes. After completion, pour out the stainless steel pickling passivation liquid and clean it with clean water or high-pressure water. Just let it dry naturally or blow dry.
News